Ionic Air Purifiers
Ionic Air Purifier with Negative Ion Generator HF 200
- Cleaning and Maintenance
- How it works
- Experience the Power of Negative Ions.
Ever wonder why it feels so pleasant near a huge waterfall? Remember how invigorating and fresh the air was? That is because that air was rich with negative ions. Must have experienced the same breath of the "clean" air right after a thunderstorm. Same phenomena!! Enrich the air with millions of negative ions. Heaven Fresh HF 200 Ionic Air Purifier works on the same exact principle.
- Increase oxygen uptake.
Researchers believe Negative Ions increase oxygen uptake capabilities on a cellular level. More oxygen to your cells means better overall health. The Nobel prize winner a few years ago discovered that lack of oxygen is the main cause of cancer.
- Improves mood and stay alert.
Research shows that negative ion help regulate brain serotonin. The brains serotonin neurotransmitter system has been associated with a variety of psychiatric disorders, including depression, anxiety, change of mood and alcohol addiction. Negative ion therapy has also been used successfully to combat SAD (Seasonal Adaptive Disorder). The UK military installs negative ion generators in fighter jet cockpits and in submarines to keep the crews frosty and alert.
- Fights asthma epidemic & allergy.
A study conducted by a group of doctor shows that negative ions generally lead to favourable effects, and many individuals experience relief from their respiratory allergies, asthma and other respiratory diseases.
- Eliminate Odour, Dust, Smoke, Pollen etc.
Negative ions produced by HF 200 Ionic Air Purifier, purifies the air by attaching themselves to positive ions, thus making them too heavy to remain in the air and falling to the ground or onto a conductive surface where normal cleaning activity can remove them from the room. Positive ions are akin to pollution, dust, dander, smoke, etc.
- 100% solid state electronic circuit
- No filter replacement (uses state of the art stainless steel dust collector plates - easily removed and cleaned
- 17 high density stainless steel needle points producing optimum negative ions level
- Noiseless operation (no moving parts)
- Low power consumption
- An effective and affordable way to combat indoor air pollution
- Rated voltage = 12V DC / 110-120V 50-60 Hz Adapter
- Power consumption = 6W
- Ion output = MAX 1,000,000/ccm
- Active oxygen output = Less than 0.05 ppm (parts per million)
- Dimension: 12 x 7.2 x 3.8 (inches)
- Weight = 1280g or 2.8lbs
- Applicable area = up to 270 sq ft (15 x 18 room)
- Power Indicator (Red Light)
- Level Indicator - High (Green Light)
- Level Indicator- Low (Yellow Light)
- Low/High Adjusting Switch
- Power ( On /Off ) Switch
- Dust collector plate
- 110-120V 50-60 Hz Adapter
220-240V 50-60 Hz Adapter (Europe & Asia)r
- 12V DC vehicle adapter
Cleaning and Maintenance
1- Cleaning the Dust Collection Plate
The dust collection plate should be cleaned about every 20-30 days. Cleaning the dust
collection plate is very simple to do. You just need to loosen the two screws that hold the
dust collection plate in. Then you just need to pull the dust collection plate out, and wipe it
off with a damp cloth. You should then wipe it off with a dry towel, and reinsert it back into its
slot. If there is difficult-to-remove residue on the plate, you should use a household cleaner,
such as ammonia or bleach, to help remove it.
Note: When removing the collector plates for periodic cleaning, please note that it must be returned to the unit in exactly the same position for a flush fit. Reversing the position will result in an incomplete closure and the unit will not function properly. When removing the collector plates for periodic cleaning, please note that it must be returned to the unit in exactly the same position for a flush fit. Reversing the position will result in an incomplete closure and the unit will not function properly.
2- Maintenance of the Negative Ion-Producing Electrodes (Needlepoints)
Every 2-3 months, or if the unit begins making noise, the dust and particulate should be wiped off from the ends of each of the needlepoints inside the front grill of the unit. First, make sure that the unit is unplugged. Next, remove the collector plate (see the photo above). Now, the needlepoints will be accessible through the opening left by the removal of the collector plate. To clean the needlepoints, either wipe off the dust with cloth, or a cotton swab (like Q-tip) dipped in rubbing alcohol.
3- Cleaning the front grill
If the front grill has collected enough dust, the unit can generate sparks. The situation like this arises when Negative Ions generated by the needlepoints gets blocked by the dust collected on the front grill. To avoid this kind of situation, make sure the front grill has no visible sign of dust particles. If there is dust, then use a cleaning brush or a vacuum cleaner and remove the dust.
Strange smell from the unit
The HF 200 produces ozone only as a byproduct of the needlepoint ionization, creating only moderate and safe levels. Depending on the size of the room, and the ventilation, it will produce about 0.015 to 0.04 ppm (parts per million) of ozone, which is well within FDA and OSHA standards.
The best way to remedy a strong ozone smell is to somehow increase air flow near or around the unit, or place it in a more open area, where there is a better air current. Examples can include turning on a ceiling fan, temporarily opening a window, and opening the door to the room. It may become necessary to run the unit on low, since the space may be small enough that it does not require the continuous use of the unit.
Cannot turn on the unit
When removing the collector plates for periodic cleaning, please note that it must be returned to the unit in exactly the same position for a flush fit. Reversing the position will result in an incomplete closure and the unit will not function properly.
Unit is making a zapping or hissing noise
This is simply a sign that the dust collection plate and the ionizer needlepoints need to be wiped off. The zapping sound is just a result of a significant amount of dust build-up on the collection plate, which results in a static charge between the dust on the collector, and one of the ion-producing electrodes.
How it Works
1. The Electronically-Created Breeze Draws Pollutants into the Air Inlet.
The negatively-charged pins and positively-charged dust collection plates create air flow, without the use of a fan. This air flow helps to draw air through the air inlet located at the top of the XJ-2000 air ionizer.
2. Pollutants are Magnetically Attached to the Electrostatically-Charged Plates.
The negatively-charged pins give particles & pollutants a negative charge, which are then magnetically attracted to the positively-charged plates. Particles & pollutants then remain magnetically trapped on the stainless steel plates until wiped clean with a dry or damp cloth.
3. The Electronic Breeze Circulates the Purified and Ionized Air Through the Air Outlet.
The electronic breeze pushes the purified air through the air outlet, or front grill of the XJ-2000 ionic air purifier. The negative ions produced by the negatively-charged pins (a.k.a. needlepoints) also emits negative ions into the air.
4. Negatively-Charged Pins Electronically Circulate Trillions of Air-Cleaning Negative Ions Throughout the Room.
The high density of negative ions released into the air have the ability of circulating throughout the room, via natural air currents and the electrical reactivity of the ions. This enables the XJ-2000 air ionizer to remove particles & pollutants from the air, even if they are not drawn past the dust-collection plates
- Superior 17 Ionic Pin design at an extremely affordable cost.
The Heaven Fresh HF 200 Ionic Air Purifier features seventeen stainless steel ionic pins and removable stainless steel dust collector plates. For comparison, here are the prices of some of the comparable Ionic Purifiers: Sharper Images Ionic Breeze £150-£250 - 2 ionic pins, Eco quest/Alpine £200-£400 - 1 ionic pin, Friedrich C90A Electrostatic Air Cleaner £250 - £300. Most of the "competition" sells for £300 and up.
- Eliminates virtually any Odour.
The Heaven Fresh HF 200 Ionic Air Purifier will give you More Energy, Relieve Allergies, make you more Alert and eliminate virtually any Foul Odour.
- SUPERIOR TO a filter (HEPA) purifier.
In a filter-type purifier with a fan or blower, only air that goes through the filter can be cleaned. The tiniest particles airborne contaminant can flow through the filter. These tiny particulates can only be removed by Heaven Fresh ionization rather than HEPA filters. 80% of all airborne pollutants and contaminants are smaller than 0.1 microns! Heaven Fresh air purifier can effectively remove airborne pollutants and contaminants as small as 0.01 microns! The most effective HEPA filters can only get rid of particles greater than 0.3 microns.
- Dust collection plates to absorb airborne contaminant.
The HF 200s uniquely designed dust collection plates efficiently absorb airborne dust, pollen, mold spores, pet dander and cigarette smoke. These collection plates help prevent "black wall effect" and they also have the capability to capture smaller particles.
- Ideal Ozone Level.
Most of the negative ions air purifier available in the market generates excessive amount of Ozone. A small amount of Ozone increases indoor air quality, kills bacteria and fungus. It also helps your body to enhance oxygen capacity of blood, vitalize body cells, regulate the functioning of the immune system. However, some assumptions have grown up around ozone, focused on the fact that ozone can cause allergy if inhaled in large quantities. The WHO (World Health Authority) guidelines, say that the maximum acceptable level of ozone is 0.1ppm (parts per million). FDA and OSHA standards require ozone level of no more than 0.05 ppm. Our Heaven Fresh HF 200 Air Purifier have the capability to produce up to 1,000,000 negative ions/cm³ with Ozone output of less than 0.04 ppm which is well within the WHO, FDA and OSHA standard.
- Appropriate amount of Negative Ions (High but not over abundance).
Some air purifiers produce excessive number of negative ions (up to billion) in a very small area. It can cause so-called "gray-walling" or "black-walling" which is the dirt particles and black residue near the needle are electro-plated or built up to the wall. As a result, it will be hard to clean the purifier. Heaven Fresh air purifier generates the high number of negative ions without having the gray-wall effect.
- Noiseless operation.
HEPA filters usually create noise pollution. HF 200 Air Purifier uses advanced electronic ionizer breeze technology with soundless design and no motor.
- No replacement Filter necessary.
HEPA filter Air Purifiers usually requires expensive replacement filter. HF 200 Ionic Air Purifier features easily removable and easily clean collection plates with no filter replacement necessary.
- No need to buy two different units ( Combination of Negative ions and Ozone Purifier).
Other air purifiers can only clean the air with negative ions or sanitize the room with the Ozone. Heaven Fresh air purifier is capable of cleaning the air, sanitize the room, remove odor and kill the microorganism all at the same time. Air cleaning is different from Air sanitizing. Air cleaning means that particles of dust and other dirt are being filtered out of the air. Air cleaning is extremely useful to prevent allergy and asthma. Air Sanitizing means that dangerous microorganism and mold spores and are being killed.
- Easily maintained and cleaned.
Wipe the easily cleaned dust collector plate every month. Clean the Needlepoints every two months, or when the unit starts making hissing sound. Clean the dust off the units circuit every 4-6 months.
- Extremely light, handy, durable and elegant appearance.
Heaven Fresh HF 200 Air Purifier with its contemporary and classy design, allows placement of the product virtually anywhere in your room.
- Very Low Electricity bill.
HF 200 Ionic Air Purifier consume only 6 W of power which is equivalent to £3 of electricity bill annually.
- Available with three different settings.
HF 200 Ionic Air Purifier allow you to adjust the settings to HI mode, LO mode and OFF according to your needs. High mode: The unit will run continuously. Low mode: Unit will run intermittently; on for three minutes, off for two minutes. This setting will accommodate different room sizes and air quality conditions.
- Manufactured by an ISO-9001 certified company.
We recognize the importance of Quality in design and manufacturing process. Our manufacturers meet the high audit requirement for International Quality Standard, ISO9001. Therefore we assure you the reliability and performance of our products shall exceed your expectation.